APEL™ APL8008T

About
APEL™ APL8008T is a Cyclic Olefin Copolymer (COC) material. It is available in North America. Typical applications include: Film Sheet&&

Product Description
Supplier	Mitsui
Generic	COC
Material Status	Commercial: Active
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.02	g/cm³	ASTM D792
Melt Flow Rate
260℃，2.16kg	15	g/10min	ASTM D1238
Shrinkage rate
MD	0.60	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	50.0	MPa	ASTM D638
Tensile strain
fracture	100	%	ASTM D638
Bending modulus	2400	MPa	ASTM D790
bending strength	90.0	MPa	ASTM D790

film	Nominal value	Unit	Test method
Water vapor transmittance	0.090	g·mm/m²/atm/24 hr	ASTM F1249

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	45	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	60.0	℃	ASTM D648
Glass transition temperature	70.0	℃	DSC

optical performance	Nominal value	Unit	Test method
Refractive index	1.540		ASTM D542
Transmittance	91.0	%	ASTM D1003
Haze	2.0	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.