API II 545 - SOLIAO

About
Product Description: API II 545 is a high impact, high heat resistant grade of impact modified polystyrene. This material features higher temperature usage, fast set-up times and dimensional stability. Application: API II 545 is suggested for heavy molded parts with large cross section requiring high impact resistance. It is an excellent profile and sheet Extrusion product balancing toughness and stiffness. Complies with FDA regulation 21 CFR 177.1640.&&

About

Product Description: API II 545 is a high impact, high heat resistant grade of impact modified polystyrene. This material features higher temperature usage, fast set-up times and dimensional stability. Application: API II 545 is suggested for heavy molded parts with large cross section requiring high impact resistance. It is an excellent profile and sheet Extrusion product balancing toughness and stiffness. Complies with FDA regulation 21 CFR 177.1640.&&

Product Description
Generic	PS (HIPS)
Material Status	Commercial: Active
Features	High impact resistance,Good Dimensional Stability,High Heat Resistance
Availabilitys	North America
Process Methods	Profile extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.04	g/cm³	ASTM D892
Melt Flow Rate
200℃，5.0kg	4.5	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
3.2mm	110	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, annealed	90.0	℃	ASTM D648
Vicat Softening Temp	101	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
Level L	47		ASTM D785
Tensile modulus	1930	MPa	ASTM D638
tensile strength
fracture	27.6	MPa	ASTM D638
Tensile strain
fracture	50	%	ASTM D638
Bending modulus	2100	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.