| About |
|---|
| apigo® E/250 is a Thermoplastic Polyolefin Elastomer (TPO (POE)) product. It can be processed by extrusion or injection molding and is available in Europe. Applications of apigo® E/250 include consumer goods, appliances, automotive, construction applications and household applications. Characteristics include: Chemical Resistant Eco-Friendly/Green Fast Molding Cycle Good Processability Low Temperature Resistant&& |
| Product Description | |
|---|---|
| Generic | Polyolefin Elastomer |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Alkali resistant,Renewable resources,Antifreeze,Quick molding cycle,Acidproof,Solvent resistance,Good coloring |
| Availabilitys | Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 14 | g/10min | ASTM D1238 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 90.0 | kN/m | ASTM D624 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -20℃ | 170 | J/m | ASTM D256 |
| 23℃ | 无断裂 | ASTM D256 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore D, 3 seconds | 48 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| — | 13.5 | MPa | ASTM D638 |
| 100% strain | 10.0 | MPa | ASTM D638 |
| 300% strain | 10.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 640 | % | ASTM D638 |
| Bending modulus | |||
| 23℃ | 250 | MPa | ASTM D790 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Barrel rear temperature | 150 to 170 | °C | |
| Barrel middle temperature | 160 to 180 | °C | |
| Barrel front temperature | 170 to 190 | °C | |
| Nozzle temperature | 180 to 200 | °C | |
| Barrel 1 zone temperature | 150 to 180 | °C | |
| Barrel 2 zone temperature | 160 to 190 | °C | |
| Barrel 3 zone temperature | 170 to 190 | °C | |
| Barrel 4 zone temperature | 180 to 190 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Without Notch |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |