| About |
|---|
| apilon 52® D1 58L是一种热塑性聚氨酯弹性体（聚酯）（TPU-聚酯）产品,。 它可以通过注射成型进行加工,在欧洲有供货。 apilon 52® D1 58L的应用领域包括工程/工业配件、电气/电子应用、电气用具、工具 和 家庭应用。 特性包括: 环保/绿色 良好的抗紫外线能力 耐低温性 耐化学品 耐磨&& |
| Product Description | |
|---|---|
| Generic | TPU-酯 |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Renewable resources,Hydrolysis stability,Antifreeze,Good wear resistance,Grease resistance |
| Availabilitys | Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.22 | g/cm³ | ASTM D792 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 165 | kN/m | ASTM D624 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| -20℃ | 140 | J/m | ASTM D256 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore D, 3 seconds | 58 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| — | 45.0 | MPa | |
| 100% strain | 15.0 | MPa | |
| 300% strain | 30.0 | MPa | |
| Tensile strain | |||
| fracture | 450 | % | ASTM D638 |
| Bending modulus | 165 | MPa | ASTM D790 |
| abrasion resistance | 30.0 | mm³ | DIN 53516 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 80.0 to 110 | °C | |
| Drying time | 2.0 | hr | |
| Recommended maximum moisture content | 0.070 | % | |
| Barrel rear temperature | 180 to 190 | °C | |
| Barrel middle temperature | 185 to 200 | °C | |
| Barrel front temperature | 190 to 215 | °C | |
| Nozzle temperature | 200 to 230 | °C | |
| Mold temperature | 30.0 to 60.0 | °C | |
| Injection pressure | 50.0 to 100 | MPa | |
| Drying temperature | 80.0 to 110 | °C | |
| Drying time | 2.0 | hr | |
| Recommended maximum moisture content | 0.070 | % | |
| Barrel 1 zone temperature | 160 to 185 | °C | |
| Barrel 2 zone temperature | 170 to 200 | °C | |
| Barrel 3 zone temperature | 175 to 210 | °C | |
| Barrel 4 zone temperature | 180 to 220 | °C | |
| Nozzle temperature | 170 to 210 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |