| About |
|---|
| apilon 52bio® DB 72 is a Thermoplastic Polyurethane Elastomer (Polyester) (TPU-Polyester) product. It can be processed by injection molding and is available in Europe. Typical application: Engineering/Industrial Parts. Primary characteristic: eco-friendly/green.&& |
| Product Description | |
|---|---|
| Generic | TPU-酯 |
| Material Status | Commercial: Negative |
| Features | Renewable resources |
| Availabilitys | Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.21 | g/cm³ | ASTM D792 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | > 135 | kN/m | ASTM D624 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Renewable Content | 18 | % |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 67 to 73 | ASTM D2240 | |
| tensile strength | > 45.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | > 250 | % | ASTM D638 |
| Bending modulus | > 1200 | MPa | ASTM D790 |
| abrasion resistance | < 80.0 | mm³ | DIN 53516 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |