| About |
|---|
| apilon 52c® C 64 PC is a Thermoplastic Polyurethane Elastomer (PC Based) (TPU-PC) product. It is available in Europe. Typical application: Coating Applications. Primary characteristic: sterilizable.&& |
| Product Description | |
|---|---|
| Generic | PC+TPU |
| Material Status | Commercial: Active |
| Features | Hydrolysis stability,High pressure disinfection,Soft |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Solution viscosity | 7000 to 11000 | mPa·s | |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 100 | kN/m | ASTM D624 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 190 to 210 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 88 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| — | 45.0 | MPa | |
| 100% strain | 7.00 | MPa | |
| 300% strain | 13.0 | MPa | |
| Tensile strain | |||
| fracture | 600 | % | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. With Notch |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |