apizero® AZ HLC200

About
apizero® AZ HLC200 is an Ethylene Vinyl Acetate Copolymer (EVA) product. It can be processed by injection molding and is available in Europe. Typical application: Consumer Goods. Characteristics include: Crosslinkable Good Flexibility&&

Product Description
Generic	EVA
Material Status	Commercial: Active
Features	Good flexibility,Crosslinked
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.210	g/cm³	ASTM D792

elastic body	Nominal value	Unit	Test method
tear strength	9.00	kN/m	ASTM D624
Compression deformation			ASTM D395
23℃，24 hr	18	%	ASTM D395
50℃，6 hr	64	%	ASTM D395

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore A, 15 seconds	45		ASTM D2240
tensile strength	2.10	MPa	ASTM D638
Tensile strain
fracture	210	%	ASTM D638

Process Conditions
injection	Nominal value	Unit	Test method
Hopper temperature	90 to 100	°C
Processing (melt) temperature	90 to 105	°C
Mold temperature	175 to 185	°C
Injection pressure	8.00 to 10.0	MPa
Back pressure	0.00 to 2.00	MPa
Screw length to diameter ratio	18.0:1.0 to 20.0:1.0

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.