| About |
|---|
| BL6 is a high density polyethylene grade with high molecular weight, suitable for blow moulding applications. Characteristics: High toughness. Good impact strength. Good stress cracking resistance. Typical applications are: Large containers above 10 litres capacity. Semi-finished stocks. * BL6 is suitable for food contact.&& |
| Product Description | |
|---|---|
| Supplier | Arak |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Good flexibility,High impact resistance,Food contact compliance,High molecular weight,High ESCR |
| Availabilitys | Africa & Middle East |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.952 | g/cm³ | DIN 53479 |
| Melt Flow Rate | |||
| 190℃，5.0kg | 0.11 | g/10min | DIN 53735 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 70 ℃ | < 10.0 | hr | Internal Method |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | > 14 | kJ/m² | DIN 53453 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Yellowness index | < 4.0 | YI | DIN 6167 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. plax, 0.5 bar |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |