| About |
|---|
| HD5620EA is a high density polyethylene copolymer grade with a narrow molecular weight distribution, suitable for thin wall injection moulding applications. Characteristics: High flow. High warpage resistance. Suitable for fast cycling applications. Typical applications are: -House wares. Caps & closures. Thin walled containers. PET bottle bases. * HD5620EA is suitable for food contact.&& |
| Product Description | |
|---|---|
| Supplier | Arak |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | High liquidity,High elastic,Quick molding cycle,Food contact compliance,Weight distribution,Copolymer |
| Availabilitys | Africa & Middle East |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.956 | g/cm³ | ASTM D2838 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 20 | g/10min | ASTM D1238 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 4.0 | kJ/m² | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 124 | ℃ | ASTM D1525 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 66 | ASTM D2240 | |
| Tensile modulus | 900 | MPa | ASTM D638 |
| tensile strength | |||
| yield | 22.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 700 | % | ASTM D638 |
| Bending modulus | 1000 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |