| About |
|---|
| EP2X83CI is a polypropylene random copolymer with excellent flow properties .The product features very high transparency & gloss. EP2X83CI is mainly designed for transparent house wares & quality packaging applications. EP2X83CI is an outstanding grade for injection moulded containers & thin-walled packaging where clarity is of utmost importance. Typical injection moulding applications include food storage containers, household articles, food packaging, cosmetics & pharmaceutical products, lids, caps & closures .In many of these applications, EP2X83CI can replace PS since it can match optical properties whilst adding low weight, low odour transfer, chemical resistance & impact strength. Another major application of EP2X83CI is the co-extrusion with other polypropylene resins to produce multilayer sheet for thermoforming trays for fresh pasta & bakery products. * EP2X83CI is suitable for food contact.&& |
| Product Description | |
|---|---|
| Supplier | Arak |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Good Clarity,Good surface appearance,High impact resistance,Good liquidity,Optical performance,Low odor,Food contact compliance,Random copolymer,Solvent resistance |
| Availabilitys | Africa & Middle East |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 11 | g/10min | ASTM D1238 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 85 | J/m | ASTM D256 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Oven Aging | |||
| 150℃ | 15.0 | day | ASTM D3012 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 83.0 | ℃ | ASTM D648 |
| Vicat Softening Temp | 128 | ℃ | ASTM D1525 2 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | 73 | ASTM D523 | |
| Haze | 17 | % | ASTM D1003 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 94 | ASTM D785 | |
| tensile strength | |||
| yield | 28.0 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 12 | % | ASTM D638 |
| Bending modulus | 1050 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |