| About |
|---|
| Aramco HDPE B5403是一种中等分子量的双峰高密度聚乙烯树脂，通常用于吹塑应用。 由该树脂制成的吹塑部件通常具有高刚度，良好的冲击强度和良好的ESCR。用于家庭和工业化学品的小型和中型吹塑容器.本产品不适用于医疗和制药应用 |
| Product Description | |
|---|---|
| Supplier | Aramco |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.3 | g/10min | ASTM D1238 |
| 190℃，5.0kg | 1.4 | g/10min | ASTM D1238 |
| Density | 0.954 | g/cm³ | ASTM D792 Method A |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 68 | ASTM D2240 | |
| tensile strength | |||
| yield | 27 | MPa | ASTM D638 |
| fracture | 34 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 740 | % | ASTM D638 |
| Bending modulus | 1200 | MPa | ASTM D790 |
| Tensile impact | 200 | kJ/m² | ASTM D1822 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 10% non-ionic surfactant, F50 | 63 | hr | ASTM D1693 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 127 | ℃ | ASTM D1525 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod notched impact strength | |||
| 23℃ | 10 | kJ/m² | ASTM D256 |
| -30℃ | 5 | kJ/m² | ASTM D256 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |