| About |
|---|
| Aramco HDPE F5101是一种双峰和高分子量高密度聚乙烯树脂，通常用于吹膜工艺，特别适用于薄膜应用。 这种树脂具有较宽的分子量分布，使其更容易加工。 由该树脂制成的薄膜通常具有高刚度，优异的冲击强度和韧性特征。用于 购物袋，垃圾袋，工业衬板。本产品不适用于医疗和制药应用。Aramco HDPE F5101树脂适用于食品接触应用。 |
| Product Description | |
|---|---|
| Supplier | Aramco |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.05 | g/10min | ASTM D1238 |
| 190℃，21.6kg | 9.3 | g/10min | ASTM D1238 |
| Density | 0.951 | g/cm³ | ASTM D792 Method A |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 无稳定剂/有稳定剂 | ||
| yield | 无稳定剂/有稳定剂 | ||
| Tensile strain | 无稳定剂/有稳定剂 | ||
| MD | 35/35 | MPa | ASTM D638 |
| MD, fracture | 560/520 | % | ASTM D882 |
| TD | 30/30 | MPa | ASTM D638 |
| TD | 550/560 | % | ASTM D882 |
| MD | 70/75 | MPa | ASTM D882 |
| 1% secant modulus | 无稳定剂/有稳定剂 | ||
| TD | 65/55 | MPa | ASTM D882 |
| MD | 930/990 | MPa | ASTM D882 |
| TD | 1030/1140 | MPa | ASTM D882 |
| tear strength | 无稳定剂/有稳定剂 | ||
| MD | 110 | mN | ASTM D1922 |
| TD | 765 | mN | ASTM D1922 |
| Falling dart impact | 325/245 | g | ASTM D1709 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| 10N | 126 | ℃ | ASTM D1525 |
| Process Conditions | |||
|---|---|---|---|
| Processing conditions | Nominal value | Unit | Test method |
| Suggested melt temperature | 180-220 | ℃ | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |