| About |
|---|
| Aramco LLDPE F2122BS是一种线性低密度聚乙烯树脂，通常用于吹膜应用。 这种树脂具有较高的熔体指数，使其更容易加工。 由这种树脂制成的薄膜通常具有高透明度，良好的韧性和良好的挤出特性。 该产品含有高水平的防滑剂和防粘剂。 典型应用 通用薄膜，服装包装，农膜。 本产品不适用于医疗和制药应用。 |
| Product Description | |
|---|---|
| Supplier | Aramco |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.2 | g/10min | ASTM D1238 |
| Density | 0.921 | g/cm³ | ASTM D792 Method A |
| melting point | 122 | ℃ | DSC |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| MD | 35 | MPa | ASTM D882 |
| TD | 30 | MPa | ASTM D882 |
| tensile strength | |||
| fracture | |||
| yield | |||
| MD | 765 | % | ASTM D882 |
| TD | 925 | % | ASTM D882 |
| 1% secant modulus | |||
| MD | 205 | MPa | ASTM D882 |
| TD | 255 | MPa | ASTM D882 |
| tear strength | |||
| MD | 1245 | mN | ASTM D1922 |
| TD | 3450 | mN | ASTM D1922 |
| Falling dart impact | 90 | g | ASTM D1709 |
| Haze | 15 | % | ASTM D1003 |
| Block load | 14 | g/100cm2 | ASTM D3354 |
| friction coefficient | |||
| static state | 0.11 | ASTM D1894 | |
| dynamic | 0.08 | ASTM D1894 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45° | 55 | ASTM D2457 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |