| About |
|---|
| Aramco LLDPE F2122是线性低密度聚乙烯树脂，通常用于流延薄膜应用。 由这种树脂制成的薄膜通常表现出优异的光学性能和良好的拉伸性能。 该产品通常也适合用作电缆混合中的基础树脂。 本产品不含防滑剂和防粘剂。 典型应用 手和托盘拉伸包装，用于复合电缆护套和低压电缆绝缘的基础树脂。 本产品不适用于医疗和制药应用。 |
| Product Description | |
|---|---|
| Supplier | Aramco |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt index | 2.2 | g/10min | ASTM D1238 |
| Density | 0.921 | g/cm³ | ASTM D792 Method A |
| melting point | 122 | ℃ | DSC |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | |||
| MD | 50 | MPa | ASTM D882 |
| TD | 30 | MPa | ASTM D882 |
| Tensile strain | |||
| MD, fracture | 620 | % | ASTM D882 |
| TD | 940 | % | ASTM D882 |
| 1% secant modulus | |||
| MD | 150 | MPa | ASTM D882 |
| TD | 150 | MPa | ASTM D882 |
| tear strength | |||
| MD | 610 | mN | ASTM D1922 |
| TD | 2315 | mN | ASTM D1922 |
| Falling dart impact | 75 | g | ASTM D1709 |
| Haze | 0.6 | % | ASTM D1003 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45° | 145 | ASTM D2457 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |