| About |
|---|
| Aramco PP HP30G是一种均聚聚丙烯树脂，通常用于纱线挤出，易于加工和热收缩率低。 由这种树脂制成的纱线通常表现出优异的机械性能。 该产品通常也用于热成型应用 典型应用 编织袋，编织布，单丝，装订带，热成型。 本产品不适用于医疗和制药应用。 |
| Product Description | |
|---|---|
| Supplier | Aramco |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Excellent Processability |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 3.0 | g/10min | ASTM D1238 |
| Density | 0.9 | g/cm³ | ASTM D792 Method A |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 34 | MPa | ASTM D638 |
| fracture | 19 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 9 | % | ASTM D638 |
| fracture | 165 | % | ASTM D638 |
| Bending modulus | 1300 | MPa | ASTM D790 |
| bending strength | 35 | MPa | ASTM D790 |
| hardness | 98 | R | ASTM D785 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| 10N | 152 | ℃ | ASTM D1525 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 3.0 | kJ/m² | ASTM D256 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |