ARBOFILL® ARBOFILL

About
Thermoplastics from renewable resources for plastics processing Our granules ARBOFORM ® , ARBOBLEND ® and ARBOFILL ® can be processed with injection moulding, extrusion, calendering, blow molding, deep drawing or pressing into moulded parts, half-finished product, sheets, films oder profiles.&&

Product Description
Generic	CA
Material Status	Commercial: Active
Features	Renewable resources,Biodegradable,Low odor
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2740	MPa	ISO 527-2
tensile strength			ISO 527-2
yield	27.9	MPa	ISO 527-2
fracture	26.7	MPa	ISO 527-2
Tensile strain			ISO 527-2
yield	3.6	%	ISO 527-2
fracture	4.5	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	10	kJ/m²	ISO 179

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.