ARCEL® 730LV - SOLIAO

About
ARCEL® 730LV is a Polystyrene + PE (PS+PE) material. It is available in North America for injection molding. Typical application of ARCEL® 730LV: Foam&&

Product Description
Generic	PS+PE
Material Status	Commercial: Active
Features	Foaming performance
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
VOC Content	8.5	%
Average particle size
98% between	0.80 to 1.7	mm

Supplementary information	Nominal value	Unit
component
Polyethylene	30	%
Polystyrene	70	%
Nominal Aged Density Expectation
Batch Expansion	28.8	kg/m³
Double Pass Expansion	27.2	kg/m³
Single Pass Expansion	32.0	kg/m³

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.