| About |
|---|
| Applications: Die cut and seal Characteristics: Smooth surface Soft ether Mid-range softening temperature&& |
| Product Description | |
|---|---|
| Generic | TPU |
| Material Status | Commercial: Active |
| Features | Soft |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| elastic body | Nominal value | Unit | Test method |
| Tensile permanent deformation | |||
| 200% strain | 15 | % | ASTM D412 |
| tensile strength | ASTM D412 | ||
| 100% strain | 6.89 | MPa | ASTM D412 |
| 300% strain | 11.7 | MPa | ASTM D412 |
| tensile strength | 37.9 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 600 | % | ASTM D412 |
| tear strength | 76.1 | kN/m | ASTM D624 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 87 | ASTM D2240 | |
| Taber abraser | |||
| 1000 cycles, 1000 g, CS-17 wheels | 5.00 | mg | ASTM D1044 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |