| About |
|---|
| Applications: Antifungal High humidity Characteristics: Enhanced UV stability Low to high slip Resists fungus attack Performs well in high humidity Good sealability&& |
| Product Description | |
|---|---|
| Generic | TPU |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Antimicrobial properties |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.12 | g/cm³ | ASTM D792 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D638 | ||
| fracture | 55.2 | MPa | ASTM D638 |
| 100% strain | 6.55 | MPa | ASTM D638 |
| 300% strain | 12.1 | MPa | ASTM D638 |
| tear strength | 87.5 | kN/m | ASTM D624 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Continuous use temperature | -45.0 to 85.0 | ℃ | ASTM D794 |
| Melting temperature | 170 to 190 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 85 | ASTM D2240 | |
| Tensile permanent deformation | 25 to 30 | % | ASTM D638 |
| Tensile strain | |||
| fracture | 520 | % | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |