Argyle ABS (P400)

About
Argyle ABS (P400) is superior grade material to regular OEM ABS P400 materials. Argyle ABS (P400) is our recommended Refill Material for Stratasys® (P400) Cassettes and Canisters.&&

Product Description
Generic	ABS
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2260	MPa	ASTM D638
tensile strength	49.6	MPa	ASTM D638
Tensile strain
fracture	4.0	%	ASTM D638
Bending modulus	2310	MPa	ASTM D790
bending strength	66.9	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	110	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature	96	℃	ASTM D648

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.