| About |
|---|
| Aristech Acrylics LLC Acrylic Sheet S-300 is a “cross linked” commercial continuous cast acrylic sheet derived from a unique formulation. Aristech Acrylics LLC Acrylic Sheet S-300 has exceptional thermoformability and solvent resistance. The following physical properties were determined using 0.125″ (3.17 mm) thickness clear S-300 Aristech Acrylics LLC Acrylic Sheet. Properties may vary somewhat on other thicknesses and/or colors (translucent, transparent or opaque).&& |
| Product Description | |
|---|---|
| Generic | SMMA |
| Material Status | Commercial: Active |
| Features | Crosslinked,Low odor,Solvent resistance,Heat Stabilized |
| Availabilitys | North America |
| Process Methods | Thermo forming |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.19 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| Saturation, 3.18 mm | 0.24 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | |||
| 3.18 mm | 246 | J/m | ASTM D6110 |
| Impact strength of cantilever beam notch | |||
| 3.2mm | 21 | J/m | ASTM D256-A |
| Dart impact equipped with measuring instruments | |||
| 3.18 mm | 4.07 | J | Internal Method |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed, 3.2 mm | 97.2 | ℃ | ASTM D648 |
| Linear coefficient of thermal expansion | |||
| MD：3.2 mm | 7.4E-5 | 1/℃ | ASTM D696 |
| specific heat | 1460 | J/kg/℃ | ASTM C351 |
| Thermal conductivity coefficient | 0.20 | W/m/K | Internal Method |
| thermal stability | |||
| 180℃，3.18 mm | No degradation | ASTM D4802 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Burning rate | |||
| 3.2 mm | 19 | mm/min | ASTM D635 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Refractive index | 1.490 | ASTM D542 | |
| Transmittance | ASTM D1003 | ||
| 3180 µm | 93.0 | % | ASTM D1003 |
| Haze | ASTM D1003 | ||
| 3180 µm | 0.80 | % | ASTM D1003 |
| 3180 µm | 0.90 | % | ASTM D1003 |
| Yellowness index | |||
| 3.18 mm | 0.48 | YI | ASTM D1925 |
| UV transmittance (250 to 370 nm) | < 1.0 | % |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot forming temperature | |||
| 3.18 mm | 171 to 193 | ℃ | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| M-grade, 3.18 mm | 102 | ASTM D785 | |
| Babbitt hardness | |||
| 3.18 mm | 50 | ASTM D2583 | |
| Tensile modulus | |||
| 3.18 mm | 3170 | MPa | ASTM D638 |
| tensile strength | |||
| Yield, 3.18 mm | 73.1 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 3.18 mm | 4.0 | % | ASTM D638 |
| Bending modulus | |||
| 3.18 mm | 3100 | MPa | ASTM D790 |
| bending strength | |||
| 3.18 mm | 108 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.125 in |
| 3. FTMS 406-M-1074 |
| 4. 30 min |
| 5. 0.125 in, Unaged |
| 6. Aged |
| 7. Unaged |
| 8. UV Spectrophotometer |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |