| About |
|---|
| thermoplastic polyurethane alloys, is a class of soft TPU materials that have been formulated by blending TPUs with soft rubbers and other proprietary additives to improve compatibility and exhibits outstanding properties&& |
| Product Description | |
|---|---|
| Generic | TPU-酯 |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Excellent Processability,Good Clarity,Good flexibility,High elastic,Hydrolysis stability,Good wear resistance,Grease resistance,Solvent resistance,Soft |
| Availabilitys | North America |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.10 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 60 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D412 | ||
| yield | 22.8 | MPa | ASTM D412 |
| 100% strain | 1.62 | MPa | ASTM D412 |
| 300% strain | 3.17 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 540 | % | ASTM D412 |
| tear strength | 43.8 | kN/m | ASTM D624 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | -50.0 | ℃ | ASTM E1356 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 71 to 77 | °C | |
| Processing (melt) temperature | 204 to 227 | °C | |
| Drying temperature | 71 to 77 | °C | |
| Melt temperature | 191 to 227 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |