| About |
|---|
| Arnitel®是高性能热塑性聚酯，此材料非常奇特，集柔韧性、耐高温、强度以及完美的加工性于一身。&&从汽车行业到电子电气行业，Arnitel®以更轻、更智能、更环保的姿态逐步替代传统橡胶，有效降低对环境的影响，最终降低系统成本。&&我们拥有一支知识专业、经验丰富的全球团队持续专注于此材料的新设计、新应用以及新市场的开发。让我们倾听你们的需要，了解你们的产品和工艺，我们定能给你不一样的解决方案。 |
| Product Description | |
|---|---|
| Supplier | DSM |
| Generic | TPC-ET |
| Material Status | Commercial: Active |
| Features | High Heat Resistance |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.09 | g/cm³ | ISO 1183 |
| Melt volume flow velocity | 47 | cm³/10min | ISO 1133 |
| temperature | 230 | °C | ISO 1133 |
| load | 2.16 | kg | ISO 1133 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Combustibility (1.5mm thickness) | HB | class | IEC 60695-11-10 |
| Test thickness | 1.5 | mm | IEC 60695-11-10 |
| UL certification | Yes | – | – |
| Relative Temperature Index – Electrical | 50 | °C | UL746B |
| Relative Temperature Index – Electrical, Thickness 1 | 1.5 | mm | UL746B |
| Relative Temperature Index – Impact | 50 | °C | UL746B |
| Relative temperature index – impact, thickness 1 | 1.5 | mm | UL746B |
| Relative temperature index – non impact | 50 | °C | UL746B |
| 1.5 | mm | UL746B |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 21 | MPa | ISO 527-1-2 |
| Fracture stress | 15 | MPa | ISO 527-1/-2 |
| Nominal fracture strain | 980 | % | ISO 527-1/-2 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |