Array™ EBM - SOLIAO

About
Polyethylene terephthalate resin Array® EBM polyethylene terepthalate (PET) resin is designed to have the melt strength and slow crystallization rate required to produce large handle ware containers by extrusion blow molding. It performs exceptionally well in the manufacture of thick walled containers where maintaining clarity and neutral color are important. The higher intrinsic viscosity of this product gives the melt strength required to maintain parison shape in continuous extrusion. This product can be used with up to 50% in-plant regrind provided that the regrind has been dried. In addition, DAK has designed Array® EBM to be recyclable with other PET products and this product has met the APR Critical Guidance Document guidelines for PET Food Contact Array® EBM is ideally suited for food packaging applications and may be used in contact with food as described on Food Contact Notification (FCN) 635 in full compliance with the Federal Food, Drug and Cosmetic Act.&&

About

Polyethylene terephthalate resin Array® EBM polyethylene terepthalate (PET) resin is designed to have the melt strength and slow crystallization rate required to produce large handle ware containers by extrusion blow molding. It performs exceptionally well in the manufacture of thick walled containers where maintaining clarity and neutral color are important. The higher intrinsic viscosity of this product gives the melt strength required to maintain parison shape in continuous extrusion. This product can be used with up to 50% in-plant regrind provided that the regrind has been dried. In addition, DAK has designed Array® EBM to be recyclable with other PET products and this product has met the APR Critical Guidance Document guidelines for PET Food Contact Array® EBM is ideally suited for food packaging applications and may be used in contact with food as described on Food Contact Notification (FCN) 635 in full compliance with the Federal Food, Drug and Cosmetic Act.&&

Product Description
Generic	PET
Material Status	Commercial: Active
Features	Excellent Processability,Good Clarity,High Viscosity,Renewable resources,Food contact compliance
Availabilitys	North America,Latin America
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Acetaldehyde		ppm	Internal Method
Intrinsic viscosity	1.1	dl/g	Internal Method
water content
as packaged		%	Internal Method
colour			Internal Method
CIE b*	-3.0 to 2.0
CIE L*	77 to 85

THERMAL	Nominal value	Unit	Test method
Melting temperature	235 to 245	℃	Internal Method

Supplementary information	Nominal value	Unit	Test method
Chip Size（nominal）	49.0 to 59.0	count/g	Internal Method
Fines（as packaged，+24 Mesh Size）		wt%	Internal Method

Process Conditions
Extrusion	Nominal value	Unit	Test method
Drying temperature	149 to 171	°C
Drying time	5.0 to 6.0	hr
Melt temperature	250 to 280	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.