| About |
|---|
| Artenius CARE is a copolymer of PET (Polyethylene-Terephthalate), delivered in resin pellets. This resin has high viscosity and is adequate for technical extrusion and for blow moulding of containers with high volume capacity, for cosmetics and pharmaceutical applications. It is also suitable for extrusion of monofilaments with excellent melt strength.&& |
| Product Description | |
|---|---|
| Generic | PET |
| Material Status | Commercial: Active |
| Features | High Viscosity,Food contact compliance,Good melt strength,Copolymer |
| Availabilitys | Africa & Middle East ,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | > 1.40 | g/cm³ | |
| Apparent density | 0.84 | g/cm³ | |
| Viscosity value | |||
| Reduced viscosity | 112.0 to 118.0 | ml/g | ISO 1628 |
| Acetaldehyde | < 1.0 | ppm | ASTM F2013 |
| Color b | < 1.00 | ASTM D6290 | |
| Color L | > 85.0 | ASTM D6290 | |
| Crystallinity | > 55 | % | |
| Weight（of 20 Chips） | 320.0 | mg | |
| humidity | < 0.20 | % | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 240 to 250 | ℃ |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 165 to 180 | °C | |
| Drying time | 5.0 to 6.0 | hr | |
| Melt temperature | 270 to 290 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |