| About |
|---|
| Artenius MB01 is a copolymer of PET (Polyethylene-Terephthalate) in amorphous state, delivered in resin pellets. This resin has a high blue concentration and very good dispersion. The material presents low viscosity and moderate crystallization speed. It can be used as a colour enhancer additive for PET or recycled resins.&& |
| Product Description | |
|---|---|
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Low Viscosity,Machinable,Food contact compliance,Copolymer,Amorphous |
| Availabilitys | Africa & Middle East ,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.76 | g/cm³ | |
| Viscosity value | |||
| Reduced viscosity | 56.0 to 60.0 | ml/g | ISO 1628 |
| Color b | -11.0 to -7.00 | ASTM D6290 | |
| Color L | < 40.0 | ASTM D6290 | |
| Weight（of 20 Chips） | 320.0 | mg | |
| humidity | < 0.30 | % | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 245 to 255 | ℃ |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Typical Molding Temperature | 270 to 290 | ℃ |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |