| About |
|---|
| Artenius XCEL D is a highly modified copolymer of PET (Polyethylene-Terephthalate), delivered in resin pellets. Artenius XCEL D belongs to the family of PET products commonly known as “PETG” (PET Glycol modified). It has been specially designed for injected moulded cosmetic packaging parts with thick walls or with sophisticated shapes that require a high mould filling capability. Its formulation contains demoulding agents that allow easy release.&& |
| Product Description | |
|---|---|
| Generic | PETG |
| Material Status | Commercial: Active |
| Features | Good stripping performance,Food contact compliance,Copolymer |
| Availabilitys | Africa & Middle East ,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.29 | g/cm³ | |
| Apparent density | 0.76 | g/cm³ | |
| Viscosity value | |||
| Reduced viscosity | 70.0 to 74.0 | ml/g | ISO 1628 |
| Color b | < 1.00 | ASTM D6290 | |
| Color L | > 64.0 | ASTM D6290 | |
| Weight（of 20 Chips） | 320.0 | mg | |
| humidity | < 0.30 | % | |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 60 | °C | |
| Drying time | 4.0 to 6.0 | hr | |
| Processing (melt) temperature | 190 to 250 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |