Artenius XCEL M

About
Artenius XCEL M is a highly modified copolymer of PET (Polyethylene-Terephthalate), delivered in resin pellets. Artenius XCEL M belongs to the family of PET products commonly known as “PETG” (PET Glycol modified). It has been specially designed for use in the manufacture of a broad field of applications, such as thermoformed blisters, mono- and multilayer films, sheets, shrinkable films by extrusion process, bottles and containers by extrusion blow moulding, tubing and profiles by continuous extrusion. The material is easy to process, allows deep thermoforming, engraving, easy sealing and printing. It provides excellent gloss, clarity and high melt strength during processing.&&

About

Artenius XCEL M is a highly modified copolymer of PET (Polyethylene-Terephthalate), delivered in resin pellets. Artenius XCEL M belongs to the family of PET products commonly known as “PETG” (PET Glycol modified). It has been specially designed for use in the manufacture of a broad field of applications, such as thermoformed blisters, mono- and multilayer films, sheets, shrinkable films by extrusion process, bottles and containers by extrusion blow moulding, tubing and profiles by continuous extrusion. The material is easy to process, allows deep thermoforming, engraving, easy sealing and printing. It provides excellent gloss, clarity and high melt strength during processing.&&

Product Description
Generic	PETG
Material Status	Commercial: Active
Features	Excellent Processability,Good Clarity,Good surface appearance,Good Printability,Food contact compliance,Good melt strength,Copolymer
Availabilitys	Africa & Middle East ,Europe
Process Methods	Profile extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.29	g/cm³
Apparent density	0.76	g/cm³
Viscosity value
Reduced viscosity	78.0 to 82.0	ml/g	ISO 1628
Color b	< 1.00		ASTM D6290
Color L	> 64.0		ASTM D6290
Weight（of 20 Chips）	320.0	mg
humidity	< 0.30	%

Process Conditions
Extrusion	Nominal value	Unit	Test method
Drying temperature	65	°C
Drying time	6.0 to 8.0	hr
Melt temperature	190 to 250	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.