| About |
|---|
| Artenius XCEL S is a highly modified copolymer of PET (Polyethylene-Terephthalate), delivered in resin pellets. Artenius XCEL S belongs to the family of PET products commonly known as “PETG” (PET Glycol modified). It has been specially designed for use in the manufacture of high performance thermo shrinkable films by extrusion. The material is easy to process, and provides excellent gloss, clarity and printability.&& |
| Product Description | |
|---|---|
| Generic | PETG |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Clarity,Good surface appearance,Good Printability,Food contact compliance,Copolymer |
| Availabilitys | Africa & Middle East ,Europe |
| Process Methods | Film extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.30 | g/cm³ | |
| Apparent density | 0.76 | g/cm³ | |
| Viscosity value | |||
| Reduced viscosity | 78.0 to 82.0 | ml/g | ISO 1628 |
| Color b | < 1.00 | ASTM D6290 | |
| Color L | > 64.0 | ASTM D6290 | |
| Weight（of 20 Chips） | 320.0 | mg | |
| humidity | < 0.30 | % | |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 60 | °C | |
| Drying time | 6.0 to 8.0 | hr | |
| Melt temperature | 190 to 250 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |