| About |
|---|
| ARTON F is a Thermoplastic material. It is available in North America for injection molding. Important attributes of ARTON F are: Flame Rated Good Aesthetics Good Processability Heat Resistant Moisture Resistant Typical applications include: Electrical/Electronic Applications Automotive Construction Applications Containers Film&& |
| Product Description | |
|---|---|
| Generic | 热塑性聚酯 |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Low or no water absorption,Good liquidity,Optical performance,High Heat Resistance,HB |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.08 | g/cm³ | ASTM D792 |
| Melt Flow Rate | ASTM D1238 | ||
| 260℃，10.0kg | 8.0 | g/10min | ASTM D1238 |
| 280℃，10.0kg | 32 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD | 0.60 to 0.80 | % | ASTM D955 |
| Water absorption rate | |||
| Saturation, 23 ℃ | 0.40 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 6.4mm | 20 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 162 | ℃ | ASTM D648 |
| Glass transition temperature | 171 | ℃ | DSC |
| Linear coefficient of thermal expansion | |||
| MD | 6.1E-5 | 1/℃ | ASTM D696 |
| Thermal conductivity coefficient | 0.19 | W/m/K | ASTM C177 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 6.0E+16 | ohms·cm | ASTM D257 |
| Dielectric constant | |||
| 1 MHz | 2.74 | ASTM D150 | |
| Dissipation factor | |||
| 1 MHz | 0.022 | ASTM D150 | |
| Arc resistance | 123 | sec | ASTM D495 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB | UL 94 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Refractive index | 1.510 | ASTM D542 | |
| Transmittance | |||
| 3200 µm | 92.0 | % | ASTM D1003 |
| Haze | |||
| 3200 µm | 1.5 | % | ASTM D1003 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 125 | ASTM D785 | |
| tensile strength | |||
| yield | 73.5 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 15 | % | ASTM D638 |
| Bending modulus | 2940 | MPa | ASTM D790 |
| bending strength | |||
| yield | 123 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |