Asaprene™ T-413

About
Asaprene™ T-413 is a Styrene Butadiene Styrene Block Copolymer (SBS) material. It is available in Asia Pacific or Europe. Primary attribute of Asaprene™ T-413: Good Adhesion. Typical application of Asaprene™ T-413: Adhesives/Tapes&&

Product Description
Supplier	Asahi Kasei
Generic	SBS
Material Status	Commercial: Active
Features	Good bond
Availabilitys	Asia Pacific,Europe

Technical Data
elastic body	Nominal value	Unit	Test method
Tensile strain
Fracture, 23 ℃, 2 mm	690	%	ISO 37

PHYSICAL	Nominal value	Unit	Test method
Density	0.940	g/cm³	ISO 1183
Melt Flow Rate			ISO 1133
Styrene/Butadiene	30/70
viscosity
25% toluene solution	0.7	Pa·s

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.