| About |
|---|
| Photo Polymer for use in all FREEFORM systems With strong PP/ABS-like properties, PlasWHITE is the starter base polymer for our ‘Plas’ range of materials. With white being an ideal choice for components that require a paint finish, PlasWHITE is well suited. Suitable for: Master Marketing Models Jigs and Fixtures RTV Molds Mechanical Assemblies Concept Models&& |
| Product Description | |
|---|---|
| Generic | 3D打印材料 |
| Material Status | Commercial: Active |
| Features | Sprayable |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.18 | g/cm³ | |
| viscosity | 0.343 | Pa·s | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 5.0 | kJ/m² |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | 84.0 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 82 | ||
| tensile strength | 51.1 | MPa | |
| Tensile strain | |||
| yield | 8.4 | % | |
| fracture | 6.6 | % | |
| Bending modulus | 1910 | MPa | |
| bending strength | 86.8 | MPa |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |