| About |
|---|
| Asrene® SM 5508 is a High Density Polyethylene product. It can be processed by coextrusion, filament extrusion, or film extrusion and is available in Asia Pacific, Europe, or North America. Applications of Asrene® SM 5508 include adhesives/tapes, coating applications, fabrics/fibers, film and straps/ropes. Characteristics include: Food Contact Acceptable Good Processability High Strength&& |
| Product Description | |
|---|---|
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Food contact compliance,Good Tensile Strength |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.954 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.75 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| F50 | 155 | hr | ASTM D1693 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 20 | µm | |
| Elastic modulus | |||
| TD, 20 µ m, blow molded film | 750 | MPa | ASTM D882 |
| MD, 20 µ m, blow molded film | 600 | MPa | ASTM D882 |
| tensile strength | ASTM D882 | ||
| MD, fracture, 20 µ m, blow molded film | 70.0 | MPa | ASTM D882 |
| TD, fracture, 20 µ m, blow molded film | 60.0 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture, 20 µ m, blow molded film | 650 | % | ASTM D882 |
| TD, fracture, 20 µ m, blow molded film | 750 | % | ASTM D882 |
| Drop hammer impact | |||
| 20 µ m, blow molded film | 50 | g | ASTM D1709 |
| tear strength | ASTM D1922 | ||
| MD，20 µm | 11.8 | kN/m | ASTM D1922 |
| TD，20 µm | 58.8 | kN/m | ASTM D1922 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod notched impact strength | |||
| 20 µ m, blow molded | 15.7 | J/cm | ASTM D3420 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -70.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 129 | ℃ | ASTM D1525 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 180 to 220 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Blown Film |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |