Asrene® UI 2650

About
Asrene® UI 2650 is a Linear Low Density Polyethylene product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of Asrene® UI 2650 include caps/lids/closures, additive/masterbatch, coating applications and consumer goods. Characteristics include: Food Contact Acceptable Good Processability Good Toughness High ESCR (Stress Crack Resistant) High Flow&&

About

Asrene® UI 2650 is a Linear Low Density Polyethylene product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of Asrene® UI 2650 include caps/lids/closures, additive/masterbatch, coating applications and consumer goods. Characteristics include: Food Contact Acceptable Good Processability Good Toughness High ESCR (Stress Crack Resistant) High Flow&&

Product Description
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Excellent Processability,Good flexibility,High liquidity,Food contact compliance,High ESCR
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.927	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	50	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
F50	30.0	hr	ASTM D1693

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	18.0	MPa	ASTM D638
Tensile strain
fracture	100	%	ASTM D638
Bending modulus	600	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	40.0	kJ/m²	ASTM D256

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -70.0	℃	ASTM D746
Vicat Softening Temp	90.0	℃	ASTM D1525

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	175 to 225	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.