AT 7110 - SOLIAO

About
AT® 7110 is a low density polyethylene (LDPE) homopolymer. This polymer complies with the requirements of USP PLASTIC Class VI with regard to biocompatibility and CFR 21 177.1520 of the Food and Drug Administration (FDA) subject to extraction limitations for specific end use applications. This polymer may be processed using conventional polymer processing equipments including extrusion, injection molding, thermoforming, blown film and blow filled seal (BFS) processes. AT® 7110 is used as packaging material for food, nutrient and pharmaceutical ingredients, as well as in applications involving devices and implants.&&

About

AT® 7110 is a low density polyethylene (LDPE) homopolymer. This polymer complies with the requirements of USP PLASTIC Class VI with regard to biocompatibility and CFR 21 177.1520 of the Food and Drug Administration (FDA) subject to extraction limitations for specific end use applications. This polymer may be processed using conventional polymer processing equipments including extrusion, injection molding, thermoforming, blown film and blow filled seal (BFS) processes. AT® 7110 is used as packaging material for food, nutrient and pharmaceutical ingredients, as well as in applications involving devices and implants.&&

Product Description
Supplier	Celanese
Generic	LDPE
Material Status	Commercial: Active
Features	Good Rigidity,Food contact compliance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.922	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.80	g/10min	ASTM D1238

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	99.6	℃	ASTM D1525
Melting temperature	114	℃	DSC

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	52		ASTM D2240
tensile strength
fracture	20.0	MPa	ASTM D638
Tensile strain
fracture	600	%	ASTM D638
Bending modulus
1% secant	269	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
2. Type IV, 2.0 in/min
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.