| About |
|---|
| This resin is commonly used for hot melt coating and adhesive applications.&& |
| Product Description | |
|---|---|
| Supplier | Celanese |
| Generic | EVA |
| Material Status | Commercial: Active |
| Features | Inoxidizability,Copolymer |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.930 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 125℃，0.325kg | 500 | g/10min | ASTM D1238 |
| Vinyl acetate content | 18.0 | wt% | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 85 | ASTM D2240 | |
| tensile strength | |||
| fracture | 4.00 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 570 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 31.0 | MPa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting peak temperature | 78.0 | ℃ | ASTM D3418 |
| Ring and Ball Softening Point | 89 | ℃ | ASTM E28 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | < 210 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type IV, 2.0 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |