| About |
|---|
| This resin is commonly used for medical packaging and is manufactured to comply with USP Class VI.&& |
| Product Description | |
|---|---|
| Supplier | Celanese |
| Generic | EVA |
| Material Status | Commercial: Active |
| Features | Copolymer |
| Availabilitys | North America |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.952 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 3.0 | g/10min | ASTM D1238 |
| Vinyl acetate content | 28 | % | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| melting point | 75 | ℃ | ASTM D3417 |
| Vicat Softening Temp | |||
| 61 | ℃ | ASTM D1525 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 28 | ASTM D2240 | |
| tensile strength | |||
| 23℃ | 24 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 23 ℃ | 770 | % | ASTM D638 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |