| About |
|---|
| Atlac 797CT is a Thermoset Polyester product. It can be processed by filament winding, hand lay-up, or laminating and is available in North America. Typical application: Coating Applications. Characteristics include: Chemical Resistant Flame Retardant Heat Resistant&& |
| Product Description | |
|---|---|
| Generic | 热固性聚酯 |
| Material Status | Commercial: Active |
| Features | Flame Characteristics,High Heat Resistance,Solvent resistance |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 1.18 | g/cm³ | ASTM D1895 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 124 | ℃ | ASTM D648 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Babbitt hardness | |||
| 3.18 mm | 45 | ASTM D2583 | |
| Tensile modulus | 3450 | MPa | ASTM D638 |
| tensile strength | |||
| yield | 53.8 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 2.0 | % | ASTM D638 |
| Bending modulus | 3520 | MPa | ASTM D790 |
| bending strength | |||
| yield | 117 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |