ATTANE™ 4404G

About
Provides improved cling in one-sided cling applications It has improved toughness and optical properties Complies with: Canadian HPFB No Objection (with limitations) EU, No 10/2011 U.S. FDA CFR 176.170(c) U.S. FDA FCN 424 Consult the regulations for complete details.&&

Product Description
Supplier	DOW
Generic	VLDPE
Material Status	Commercial: Negative
Availabilitys	North America,Latin America,Asia Pacific

film	Nominal value	Unit	Test method
Membrane puncture resistance			Internal Method
20 µm	18.9	J/cm³	Internal Method
51 µm	17.5	J/cm³	Internal Method
Secant modulus			ASTM D882
2% secant, MD: 20 µ m	58.8	MPa	ASTM D882
2% secant, MD: 51 µ m	62.6	MPa	ASTM D882
2% secant, TD: 20 µ m	64.7	MPa	ASTM D882
2% secant, TD: 51 µ m	63.0	MPa	ASTM D882
tensile strength			ASTM D882
MD, yield, 20 µ m	7.00	MPa	ASTM D882
MD, yield, 51 µ m	6.76	MPa	ASTM D882
TD, yield, 20 µ m	4.92	MPa	ASTM D882
TD, yield, 51 µ m	6.34	MPa	ASTM D882
MD, fracture, 20 µ m	36.9	MPa	ASTM D882
MD, fracture, 51 µ m	32.6	MPa	ASTM D882
TD, fracture, 20 µ m	29.1	MPa	ASTM D882
TD, fracture, 51 µ m	32.4	MPa	ASTM D882
Tensile strain			ASTM D882
MD, fracture, 20 µ m	500	%	ASTM D882
MD, fracture, 51 µ m	660	%	ASTM D882
TD, fracture, 20 µ m	710	%	ASTM D882
TD, fracture, 51 µ m	710	%	ASTM D882
Drop hammer impact			ASTM D1709B
20 µm	> 850	g	ASTM D1709-B
51 µm	> 850	g	ASTM D1709-B
Elmandorf tear strength			ASTM D1922
MD：20 µm	330	g	ASTM D1922
MD：51 µm	960	g	ASTM D1922
TD：20 µm	500	g	ASTM D1922
TD：51 µm	1100	g	ASTM D1922
Oxygen permeability
23℃，51 µm	450	cm³·mm/m²/atm/24 hr	ASTM D3985
Water vapor transmittance
51 µm	0.85	g·mm/m²/atm/24 hr	ASTM F1249
Carbon dioxide transfer rate
23℃，50.8 µm	2000	cm³·mm/m²/atm/24 hr	Internal Method

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	71.1	℃	ASTM D1525
Melting temperature
DSC	124	℃	Internal Method

optical performance	Nominal value	Unit	Test method
gloss			ASTM D2457
45°，20.3 µm	92		ASTM D2457
45°，50.8 µm	90		ASTM D2457
transparency			ASTM D1746
20.3 µm	99.0		ASTM D1746
50.8 µm	99.0		ASTM D1746
Haze			ASTM D1003
20.3 µm	0.60	%	ASTM D1003
50.8 µm	1.8	%	ASTM D1003

Notes
1. Conditions of Use A through H
2. With limitations
3. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.