| About |
|---|
| A midrange gloss, PVC powder, extrusion compound for exterior/interior applications. Also used as a capstock.&& |
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | HB |
| Availabilitys | North America |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.45 to 1.49 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore D, 22 ℃ | 76 to 82 | ASTM D2240 | |
| Tensile modulus | |||
| 22℃ | 2620 | MPa | ASTM D638 |
| tensile strength | |||
| Yield, 22 ℃ | 42.1 | MPa | ASTM D638 |
| Bending modulus | |||
| 22℃ | 2650 | MPa | ASTM D790 |
| bending strength | |||
| 22℃ | 80.0 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| 0℃ | 80 | J/m | ASTM D256 |
| 23℃ | 170 | J/m | ASTM D256 |
| Falling impact resistance | ASTM D4226 | ||
| 22℃，Extruded at 380 to 390° F melt temperature | 66.7 | J/cm | ASTM D4226 |
| 22℃，Extruded at 380 to 390° F melt temperature | 267 | J/cm | ASTM D4226 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 72.2 | ℃ | ASTM D648 |
| Linear coefficient of thermal expansion | |||
| MD：22℃ | 6.5E-5 | 1/℃ | ASTM D696 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB | ASTM D635 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Procedure A |
| 3. Procedure B |
| 4. Instantaneous |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |