| About |
|---|
| Product Description | |
|---|---|
| Supplier | Huntsman |
| Material Status | Commercial: Negative |
| Features | Durability,Good wear resistance,Good surface appearance,HB |
| Availabilitys | Europe,North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.22 | g/cm³ | ISO 2781 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 80 | ISO 868 | |
| Shaw’s D | 30 | ISO 868 | |
| abrasion resistance | 30.0 | mm³ | ISO 4649 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| 300% strain | 10.0 | MPa | ISO 37 |
| 100% strain | 5.00 | MPa | ISO 37 |
| elongation at break | 700 | % | ISO 37 |
| tear strength | 60 | kN/m | ISO 34-1 |
| Compression deformation | |||
| 23℃，70hr | 25 | % | ISO 815 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.0 mm | HB | UL 94 | |
| 3.0 mm | HB | UL 94 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |