| About |
|---|
| AvaSpire® AV-722 CF30 is a 30% carbon fiber reinforced version of AvaSpire® AV-722. This formulation offers improved part economics relative to 30% carbon fiber reinforced PEEK while retaining most of the desirable high performance attributes of carbon fiber reinforced PEEK. Those attributes include chemical resistance, fatigue resistance, and long term thermal oxidative stability. The excellent balance of properties of AV-722 CF30 makes this grade well suited for a broad range of applications across a number of industries, including healthcare, transportation, electronics, oil and gas and chemical processing. The melt processing behavior of AV-722 CF30 is overall very similar to that of 30% CF reinforced PEEK.&& |
| Product Description | |
|---|---|
| Supplier | Solvay |
| Generic | PAEK |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good Dimensional Stability,Flame Characteristics,High Heat Resistance,Solvent resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Profile extrusion |
| Technical Data | |||
|---|---|---|---|
| IMPACT | Nominal value | Unit | Test method |
| Impact strength of cantilever beam notch | |||
| — | 53 | J/m | ASTM D256 |
| — | 8.5 | kJ/m² | ISO 180 |
| Notched impact strength of cantilever beam | |||
| — | 530 | J/m | ASTM D4812 |
| — | 39 | kJ/m² | ISO 180 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, annealed | 276 | ℃ | ASTM D648 |
| Glass transition temperature | 150 | ℃ | ASTM D3418 |
| Melting peak temperature | 340 | ℃ | ASTM D3418 |
| Linear coefficient of thermal expansion | |||
| MD：-50~50℃ | 6.0E-6 | 1/℃ | ASTM E831 |
| specific heat | DSC | ||
| 50℃ | 1280 | J/kg/℃ | DSC |
| 200℃ | 1740 | J/kg/℃ | DSC |
| Thermal conductivity coefficient | 0.34 | W/m/K | ASTM C177 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| M-level | 107 | ASTM D785 | |
| Tensile modulus | |||
| — | 22000 | MPa | ASTM D638 |
| — | 26600 | MPa | ISO 527-2/1A/1 |
| tensile strength | |||
| yield | 224 | MPa | ISO 527-2/1A/5 |
| — | 200 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 1.5 | % | ASTM D638 |
| fracture | 1.5 | % | ISO 527-2/1A/5 |
| Bending modulus | |||
| — | 19300 | MPa | ASTM D790 |
| — | 25000 | MPa | ISO 178 |
| bending strength | |||
| — | 304 | MPa | ASTM D790 |
| — | 334 | MPa | ISO 178 |
| compressive strength | 170 | MPa | ASTM D695 |
| shear strength | 98.0 | MPa | ASTM D732 |
| Poisson’s ratio | 0.44 | ASTM E132 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.42 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 400℃，2.16kg | 0.80 | g/10min | ASTM D1238 |
| Shrinkage rate | ASTM D955 | ||
| MD：3.2 mm | 0.0 to 0.20 | % | ASTM D955 |
| TD：3.2 mm | 1.4 to 1.6 | % | ASTM D955 |
| Water absorption rate | |||
| 24hr | 0.10 | % | ASTM D570 |
| Apparent viscosity of melt | |||
| 400℃，1000 sec^-1 | 470 | Pa·s |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 149 | °C | |
| Drying time | 4.0 | hr | |
| Barrel rear temperature | 366 | °C | |
| Barrel middle temperature | 371 | °C | |
| Barrel front temperature | 377 | °C | |
| Nozzle temperature | 382 | °C | |
| Mold temperature | 177 to 204 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 5″ x 0.5″ x 0.125″ bars |
| 3. 0.20 in/min |
| 4. For major component |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |