AVIMID® N - SOLIAO

About
AVIMID® N is a high temperature, post-curable, 775°F (413°C) Tg thermoplastic polyimide composite with wet service capability up to 630°F (332°C) and dry service capability of 700°F (370°C). AVIMID N has the industry’s best thermal oxidative resistance of all organic matrices and is the preferred product when high temperature durability is needed. It is a very tough composite system and has favorable dielectric properties making it well suited for missile and turbine engine applications. AVIMID N was formulated to be a non-MDA, high temperature composite that would allow the use of typical safety/health procedures and personal protection equipment (PPE). It can be compression molded into low void parts to meet demanding aerospace requirements or alternatively processed in a vacuum bag autoclave process to meet more flexible requirements usually seen in non-aerospace applications. AVIMID N is solution impregnated on a variety of fibers and fabrics that result in prepregs that retain their tack and drape for up to 6 days at 70°F (21°C). Tack can be regenerated or enhanced in a limited way by spraying the prepreg with ethanol. The prepreg has a shelf life of 12 months from date of manufacture when stored at 0°F (-18°C). Suggested Applications: Turbine engine components Missile components&&

About

AVIMID® N is a high temperature, post-curable, 775°F (413°C) Tg thermoplastic polyimide composite with wet service capability up to 630°F (332°C) and dry service capability of 700°F (370°C). AVIMID N has the industry’s best thermal oxidative resistance of all organic matrices and is the preferred product when high temperature durability is needed. It is a very tough composite system and has favorable dielectric properties making it well suited for missile and turbine engine applications. AVIMID N was formulated to be a non-MDA, high temperature composite that would allow the use of typical safety/health procedures and personal protection equipment (PPE). It can be compression molded into low void parts to meet demanding aerospace requirements or alternatively processed in a vacuum bag autoclave process to meet more flexible requirements usually seen in non-aerospace applications. AVIMID N is solution impregnated on a variety of fibers and fabrics that result in prepregs that retain their tack and drape for up to 6 days at 70°F (21°C). Tack can be regenerated or enhanced in a limited way by spraying the prepreg with ethanol. The prepreg has a shelf life of 12 months from date of manufacture when stored at 0°F (-18°C). Suggested Applications: Turbine engine components Missile components&&

Product Description
Supplier	Cytec Industries
Generic	TPI
Material Status	Commercial: Active
Features	Good heat aging resistance,Good flexibility,High Heat Resistance,Inoxidizability,Baking,Good tear strength,High pressure heat resistance
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.45	g/cm³

MECHANICAL	Nominal value	Unit
Tensile modulus	4100	MPa
tensile strength	110	MPa
Tensile strain
fracture	6.0	%

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	340 to 355	℃

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.