AVIMID® R - SOLIAO

About
AVIMID® R is a high temperature, 581°F (305°C) Tg, thermoset polyimide resin with good 500°F (260°C) wet and 550°F (288°C) dry service capability. AVIMID R has outstanding thermal oxidative stability, excellent resistance to aircraft fluids and is tough, showing little micro-cracking during severe thermal cycling. AVIMID R was formulated for prepreg autoclave vacuum bag processing but can be successfully compression molded both as a prepreg and in dry forms as neat resin or chopped-fiber molding compound. Unidirectional tape and woven prepreg of AMIMID R will retain tack and drape for 14 days at 70°F (21°C). Standard autoclave or compression molding processes, to a final temperature of 680°F (360°C) will result in full Tg development/cure, with no need for any post-cure treatment. AVIMID R can be solution impregnated on a variety of fibers and fabrics. Suggested Applications: Jet engine components&&

About

AVIMID® R is a high temperature, 581°F (305°C) Tg, thermoset polyimide resin with good 500°F (260°C) wet and 550°F (288°C) dry service capability. AVIMID R has outstanding thermal oxidative stability, excellent resistance to aircraft fluids and is tough, showing little micro-cracking during severe thermal cycling. AVIMID R was formulated for prepreg autoclave vacuum bag processing but can be successfully compression molded both as a prepreg and in dry forms as neat resin or chopped-fiber molding compound. Unidirectional tape and woven prepreg of AMIMID R will retain tack and drape for 14 days at 70°F (21°C). Standard autoclave or compression molding processes, to a final temperature of 680°F (360°C) will result in full Tg development/cure, with no need for any post-cure treatment. AVIMID R can be solution impregnated on a variety of fibers and fabrics. Suggested Applications: Jet engine components&&

Product Description
Supplier	Cytec Industries
Generic	PI
Material Status	Commercial: Active
Features	Good heat aging resistance,Good flexibility,High Heat Resistance,Inoxidizability,Baking,Good tear strength,High pressure heat resistance
Availabilitys	North America

Technical Data
MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	3590	MPa
tensile strength	117	MPa
Tensile strain
fracture	3.3	%

THERMAL	Nominal value	Unit
Glass transition temperature
—	305	℃
—	487	℃

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.