AVIMID® RB - SOLIAO

About
AVIMID® RB is a high temperature, 644°F (340°C) Tg thermoset polyimide resin with wet service capability to more than 530°F (277°C) and dry service capability of 600°F (316°C). AVIMID RB has excellent thermal oxidative stability and resistance to aircraft fluids. AVIMID RB was formulated for prepreg autoclave vacuum bag processing, but can be successfully compression molded both as a prepreg and in dry forms as neat resin or chopped-fiber molding compound. Unidirectional tape and woven prepreg of AVIMID RB will retain their tack and drape for 14 days at 70°F (21°C). Standard autoclave or compression molding processes, to a final temperature of 680°F (360°C) will result in full Tg development/cure with no need for post-cure treatment. AVIMID RB can be solution impregnated on a variety of fibers and fabrics.&&

About

AVIMID® RB is a high temperature, 644°F (340°C) Tg thermoset polyimide resin with wet service capability to more than 530°F (277°C) and dry service capability of 600°F (316°C). AVIMID RB has excellent thermal oxidative stability and resistance to aircraft fluids. AVIMID RB was formulated for prepreg autoclave vacuum bag processing, but can be successfully compression molded both as a prepreg and in dry forms as neat resin or chopped-fiber molding compound. Unidirectional tape and woven prepreg of AVIMID RB will retain their tack and drape for 14 days at 70°F (21°C). Standard autoclave or compression molding processes, to a final temperature of 680°F (360°C) will result in full Tg development/cure with no need for post-cure treatment. AVIMID RB can be solution impregnated on a variety of fibers and fabrics.&&

Product Description
Supplier	Cytec Industries
Generic	PI
Material Status	Commercial: Active
Features	Good heat aging resistance,High Heat Resistance,Inoxidizability,Baking,High pressure heat resistance
Availabilitys	North America

Technical Data
MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	3790	MPa
tensile strength	82.7	MPa
Tensile strain
fracture	2.4	%
Bending modulus	3790	MPa
bending strength	111	MPa

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.