| About |
|---|
| AXELERON™ CS 6005 NT CPD is a high-molecular weight, density polyethylene insulation compound (“CPD”) with an excellent combination of mechanical and electrical properties which make it well suited for use as a primary dielectric. Specifications AXELERON™ CS 6005 NT CPD meets the following raw material specifications: ASTM D 1248 IA-5, Grades E4 and E5 Federal LP-390C II-L, Grade 3, Category 5 MIL-C-17F, Amendment 1, Paragraph 3.5.2.1, Type A&& |
| Product Description | |
|---|---|
| Supplier | DOW |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.920 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.20 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 100% non-ionic detergent, F20 | > 96.0 | hr | ASTM D1693 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 15.2 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 600 | % | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -90.0 | ℃ | ASTM D746 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | |||
| -5 ℃ | > 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric strength | |||
| 3.18 mm | 22 | kV/mm | ASTM D149 |
| Dielectric constant | |||
| 1 MHz | 2.28 | ASTM D1531 | |
| Dissipation factor | |||
| 1 MHz | 2.0E-4 | ASTM D1531 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 191 to 218 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Method A (Short-Time) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |