| About |
|---|
| 高密度电缆护套材料 AXELERON™ FO A-6318 BK 是一种采用UNIPOL™ PE工艺制备的高密度聚乙烯护套材料。这种材料加工简易，收缩小，在韧性、耐应力开裂、耐磨性能和耐候性能上具有较好的平衡性。 AXELERON™ FO A-6318 BK 适合作为光缆电缆的护套材料。 规格 AXELERON™ FO A-6318 BK 满足以下原材料规格要求： ASTM D 1248 Type III, Class C, Category 4, Grades E8, E9 在采用正确的商用挤出机挤出加工规范的条件下，使用AXELERON™ FO A-6318 BK 作为护套材料的电线和电缆应该满足以下规格要求： ICEA: S-61-402 ANSI: C8.35 REA PE 39 and PE 89 IEC 60502&& |
| Product Description | |
|---|---|
| Supplier | DOW |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.954 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.70 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 10% non-ionic detergent, F0 | > 450 | hr | ASTM D1693 |
| Carbon black content | 2.6 | % | ASTM D1603 |
| absorption coefficient | |||
| kAB/m | > 400 | ASTM D3349 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 22.1 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 600 | % | ASTM D638 |
| Bending modulus | 896 | MPa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Linear coefficient of thermal expansion | |||
| MD：23℃ | 1.3E-4 | 1/℃ | Internal Method |
| Heat resistant stress cracking | |||
| F0 | > 336 | hr | ASTM D2951 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric constant | |||
| 1 MHz | 2.50 | ASTM D1531 | |
| Dissipation factor | |||
| 1 MHz | 3.0E-4 | ASTM D1531 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 218 to 260 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |