AXELERON™ GP 6059 BK CPD

About
AXELERON™ GP 6059 BK CPD is a prime quality telephone cable black jacketing compound (“CPD”). It offers improved low temperature and high temperature performance plus excellent environmental stress-cracking resistance, outdoor weatherability, and toughness. Specifications AXELERON™ GP 6059 BK CPD meets the following raw material specifications: ASTM D 1248 IC-4, Grades E5, J1, J3 Federal LP-390C III-L, Grades 2, 3, 4 and Category 4 REA PE-22, 38, 39, 86, 89, 90 (Raw Materials Sections) ISO 1872-PE, KCH, 18-D006 GB/T 15065 Cable jacketed with AXELERON™ GP 6059 BK CPD, using sound commercial extrusion practices, should meet the following specifications: ICEA: S-83-640 ASTM D 2308 Telcordia GR-421-CORE EN 50290-2-24 IEC 60708 YD/T 901 IEC 60502 ST3, ST7 IEC 60840 ST3, ST7 HD 620 S2, Part 1, Table 4B, DMP 10, DMP 14, DMP 17 ICEA S-94-649 ICEA S-97-682 ICEA S-108-720 ICEA S-84-608 YD/T 1092 IEC 62067, ST3, ST7 IEC 60794&&

About

AXELERON™ GP 6059 BK CPD is a prime quality telephone cable black jacketing compound (“CPD”). It offers improved low temperature and high temperature performance plus excellent environmental stress-cracking resistance, outdoor weatherability, and toughness. Specifications AXELERON™ GP 6059 BK CPD meets the following raw material specifications: ASTM D 1248 IC-4, Grades E5, J1, J3 Federal LP-390C III-L, Grades 2, 3, 4 and Category 4 REA PE-22, 38, 39, 86, 89, 90 (Raw Materials Sections) ISO 1872-PE, KCH, 18-D006 GB/T 15065 Cable jacketed with AXELERON™ GP 6059 BK CPD, using sound commercial extrusion practices, should meet the following specifications: ICEA: S-83-640 ASTM D 2308 Telcordia GR-421-CORE EN 50290-2-24 IEC 60708 YD/T 901 IEC 60502 ST3, ST7 IEC 60840 ST3, ST7 HD 620 S2, Part 1, Table 4B, DMP 10, DMP 14, DMP 17 ICEA S-94-649 ICEA S-97-682 ICEA S-108-720 ICEA S-84-608 YD/T 1092 IEC 62067, ST3, ST7 IEC 60794&&

Product Description
Supplier	DOW
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.932	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	0.60	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
10% non-ionic detergent, F0	> 1000	hr	ASTM D1693
Carbon black content	2.6	%	ASTM D1603
absorption coefficient
kAB/m	> 400		ASTM D3349

MECHANICAL	Nominal value	Unit	Test method
tensile strength
—	21.0	MPa	IEC 60811-502
—	16.2	MPa	ASTM D638
Tensile strain
fracture	900	%	IEC 60811-502
fracture	700	%	ASTM D638

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature			ASTM D746
—	< -100	℃
—	< -76.0	℃
Oxygen sensing time
200℃	120	min	ASTM D3895

Electrical performance	Nominal value	Test method
Dielectric constant
1 MHz	2.48	ASTM D1531
Dissipation factor
1 MHz	3.0E-4	ASTM D1531

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	218 to 246	°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. Typical value per IEC 60811-406 > 1000 hrs.
3. Type IV
4. Speed 20 in/min (500mm/min)
5. F50
6. Notched, F50
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.