AXELERON™ GP 7590 NT CPD

About
AXELERON™ GP 7590 NT CPD is a Bimodal Polyethylene Compound (“CPD”) which is designed for communications and power cable jacketing applications. AXELERON™ GP 7590 NT CPD has excellent Environmental Stress Crack Resistance and low temperature performance. Specifications AXELERON™ GP 7590 NT CPD meets the following material specification: ASTM D1248 Type III, Class A, Category 5, Grade J5&&

About

AXELERON™ GP 7590 NT CPD is a Bimodal Polyethylene Compound (“CPD”) which is designed for communications and power cable jacketing applications. AXELERON™ GP 7590 NT CPD has excellent Environmental Stress Crack Resistance and low temperature performance. Specifications AXELERON™ GP 7590 NT CPD meets the following material specification: ASTM D1248 Type III, Class A, Category 5, Grade J5&&

Product Description
Supplier	DOW
Generic	HDPE
Material Status	Commercial: Active
Availabilitys	North America
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.949	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.080	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	24.8	MPa	ASTM D638
Tensile strain
fracture	740	%	ASTM D638
Bending modulus	1030	MPa	ASTM D790
Slow crack propagation PENT	> 6000	hr	ASTM F1473

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -75.0	℃	ASTM D746A

Electrical performance	Nominal value	Test method
Dielectric constant
1 MHz	2.33	ASTM D1531
Dissipation factor
1 MHz	1.0E-4	ASTM D1531

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	193 to 227	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.