AXELERON™ GP C-0588 BK CPD

About
AXELERON™ GP C-0588 BK CPD is a prime quality telephone cable black jacketing compound (“CPD”). It offers excellent environmental stress-cracking resistance, outdoor weatherability, toughness, low temperature performance, and extrudability. AXELERON™ GP C-0588 BK CPD can be used by wire and cable manufacturers for the entire range of telephone cable sizes and configurations. It can be used for both air-core, and jelly-filled constructions, and in both aerial and buried applications. AXELERON™ GP C-0588 BK CPD can also be used as a high-grade power cable jacket. Specifications AXELERON™ GP C-0588 BK CPD meets the following raw material specifications: ASTM D 1248 IC-5, Grades E5, J1, J3 Federal LP-390C, III-L, Grades 2, 3 and 4, Category 5 REA PE-22, 38, 39, 86, 89, 90 Cable jacketed with AXELERON™ GP C-0588 BK CPD, using sound commercial extrusion practices, should meet the following specifications: ICEA: S-61-402; NEMA WC5 ANSI: C8. 35 ASTM: D 2308 British Post Office Specification M-132G Telcordia GR 421 Core ANSI/ICEA S-84-608-1988&&

About

AXELERON™ GP C-0588 BK CPD is a prime quality telephone cable black jacketing compound (“CPD”). It offers excellent environmental stress-cracking resistance, outdoor weatherability, toughness, low temperature performance, and extrudability. AXELERON™ GP C-0588 BK CPD can be used by wire and cable manufacturers for the entire range of telephone cable sizes and configurations. It can be used for both air-core, and jelly-filled constructions, and in both aerial and buried applications. AXELERON™ GP C-0588 BK CPD can also be used as a high-grade power cable jacket. Specifications AXELERON™ GP C-0588 BK CPD meets the following raw material specifications: ASTM D 1248 IC-5, Grades E5, J1, J3 Federal LP-390C, III-L, Grades 2, 3 and 4, Category 5 REA PE-22, 38, 39, 86, 89, 90 Cable jacketed with AXELERON™ GP C-0588 BK CPD, using sound commercial extrusion practices, should meet the following specifications: ICEA: S-61-402; NEMA WC5 ANSI: C8. 35 ASTM: D 2308 British Post Office Specification M-132G Telcordia GR 421 Core ANSI/ICEA S-84-608-1988&&

Product Description
Supplier	DOW
Generic	LDPE
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.932	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	0.34	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
10% non-ionic detergent, F20	> 500	hr	ASTM D1693
Carbon black content	2.6	%	ASTM D1603
absorption coefficient
kAB/m	> 400		ASTM D3349

MECHANICAL	Nominal value	Unit	Test method
tensile strength			ASTM D638
yield	10.9	MPa
—	16.4	MPa
Tensile strain
fracture	700	%	ASTM D638

Electrical performance	Nominal value	Test method
Dielectric constant
1 MHz	2.54	ASTM D1531
Dissipation factor
1 MHz	2.0E-4	ASTM D1531

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	204 to 227	°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. Type IV, 2.0 in/min
3. Speed C
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.